Filter: All brands |
Arai Motorsport AMS Response Front Member Brace | Check car compatibility | |
  |
Arai Motorsport AMS Response RFB Belt Bar I | Check car compatibility | |
Provides eyebolt mounting points for racing harnesses (seat belts), while increasing chassis rigidity. Fully bolt on installation allows for easy removal when not required. Harnesses and eye bolts sold separately). |
Arai Motorsport AMS Response RFB Belt Bar II | Check car compatibility | |
Provides eyebolt mounting points for racing harnesses (seat belts), while increasing chassis rigidity. Fully bolt on installation allows for easy removal when not required. Harnesses and eye bolts sold separately). |
Arai Motorsport AMS Response RFB Floor I | Check car compatibility | |
  |
Arai Motorsport AMS Response RFB Rear Control I | Check car compatibility | |
  |
Arai Motorsport AMS Response RFB Rear Member I | Check car compatibility | |
  |
Arai Motorsport AMS Response RFB Strut I | Check car compatibility | |
  |
Auto Advance A-Sports Gachiri Support | Check car compatibility | |
Inner fender braces. |
Auto Produce A3 Agress Floor Support Bar | Check car compatibility | |
Adds support in the lateral direction, improving straight-line stability and steering feel while stabilising the vehicle by reducing fluctuations during high-speed driving. |
AutoExe Floor Cross Bar | Check car compatibility | |
  |
AutoExe Member Brace Set | Check car compatibility | |
  |
AutoExe Motion Control Beam | Check car compatibility | |
Item that reinforces the body and increases torsional rigidity. Features built in friction type vibration damping damper. |
Bee-R Yamaha Performance Damper | Check car compatibility | |
Performance damper unit only. -(GL)SHCBBEEGEN01 |
C-ONE Performance Bar | Check car compatibility | |
  |
C-ONE Trunk Bar | Check car compatibility | |
  |
Colt Speed COX Body Damper | Check car compatibility | |
Setting by Colt Speed. |
Colt Speed Lower Arm Brace Bar | Check car compatibility | |
  |
Colt Speed Lower Bar | Check car compatibility | |
  |
Colt Speed Rear Member Brace Bar | Check car compatibility | |
  |
CUSCO Floor Sub Frame Support Plate | Check car compatibility | |
  |
CUSCO Lower Arm Bar Version I | Check car compatibility | |
Reduce chassis flexing and improve body rigidity. The lateral arm improves body rigidity by connecting at the lower arm points, thus preventing body flex and therefore dramatically improving steering rigidity and response, and traction. |
CUSCO Lower Arm Bar Version II | Check car compatibility | |
  |
CUSCO Mounting Stay | Check car compatibility | |
Mounting bracket. |
CUSCO Pillar Side Bar | Check car compatibility | |
  |
CUSCO Power Brace | Check car compatibility | |
  |
CUSCO Rear Frame Reinforcement Bar | Check car compatibility | |
  |
CUSCO Rear Trunk Bar | Check car compatibility | |
  |
CUSCO Tension Rod Bar | Check car compatibility | |
Made from 22mm steel pipe that enhances chassis stiffness, rigidity and stabilizes alignment. More effective when used with the Cusco Pillowball Tension Rod kit (Sold separately), where further stability can be achieved when the vehicle is under extreme drag/dive (acceleration/braking). |
Do Luck Floor Support Bar | Check car compatibility | |
  |
Do Luck Ladder Bar | Check car compatibility | |
  |
Do Luck Rear Cross Bar | Check car compatibility | |
  |
HKS Carbon Brace | Check car compatibility | |
HKS and Graphite Design collaboration item. Known for their popular carbon golf club shafts amongst world tour professionals, these bars are designed to create a unique "bend" and improve driving performance. |
HKS Kansai Front Bulkhead Bar | Check car compatibility | |
  |
HKS Kansai Front Lower Brace Bar | Check car compatibility | |
  |
HKS Kansai Lower Arm Bar | Check car compatibility | |
  |
HKS Kansai Lower Brace Bar Set | Check car compatibility | |
  |
HKS Kansai Monocoque Bar | Check car compatibility | |
  |
HKS Kansai Rear End Bar | Check car compatibility | |
  |
HKS Kansai Rear Member Brace Bar | Check car compatibility | |
  |
HKS Kansai Rear Upper Brace | Check car compatibility | |
  |
HKS Kansai Transmission Member Brace Bar | Check car compatibility | |
  |
J Speed Lower Arm Bar | Check car compatibility | |
  |
J Speed Sujikin Kun | Check car compatibility | |
Inner fender braces. |
J's Racing SPL Floor Bar | Check car compatibility | |
  |
J's Racing SPL Rear Pillar Bar | Check car compatibility | |
  |
KNIGHT SPORTS Under Brace Set | Check car compatibility | |
  |
LAILE Beatrush Brace Bar | Check car compatibility | |
  |
LAILE Beatrush Front Frame Stopper | Check car compatibility | |
  |
LAILE Beatrush Performance Bar | Check car compatibility | |
  |
LAILE Beatrush Side Sill Plate | Check car compatibility | |
Side sill reinforcement plates. Improves vertical and twist rigidity of the chassis floor. |
LAILE Beatrush Titanium Performance Bar | Check car compatibility | |
Lightweight titanium chassis strengthening bar. |
Mazdaspeed Mazda Bolt Set | Check car compatibility | |
  |
Mazdaspeed Lower Arm Bar | Check car compatibility | |
  |
Mazdaspeed Performance Bar | Check car compatibility | |
  |
Mine's Lower Arm Bar | Check car compatibility | |
  |
Monster Sport Frame Brace | Check car compatibility | |
  |
Monster Sport MX Body Damper | Check car compatibility | |
Jointly developed by YAMAHA and Monster Sports. The Performance Damper uses a new technology that effectively absorbs deformation of the vehicle body and unpleasant noise and vibration while driving. It realizes another dimension of high-quality driving that cannot be achieved with conventional reinforcing bars and rigid parts. |
MUGEN Performance Damper | Check car compatibility | |
Performance dampers dampen the vibration of the car body, eliminating unpleasant micro-vibrations and noise improving steering stability. Overall better vehicle performance by providing high-quality ride comfort and steering stability. |
NAGISA Auto UEO Style Front Bomber | Check car compatibility | |
Front chassis frame reinforcement. |
NAGISA Auto Gachiri Support | Check car compatibility | |
Inner fender braces. Patent approved, 3D CAD designed. Steel. |
NAGISA Auto Shyakitt Brace | Check car compatibility | |
Front strut tower and bulkhead braces. |
NEXT Butterfly Bar | Check car compatibility | |
  |
NEXT Miracle Cross Bar | Check car compatibility | |
  |
NEXT Miracle Cross Bar - Option Bar More Info | Check car compatibility | |
Optional Bar(s) for use with NEXT Miracle Cross Bar. |
NEXT Miracle Cross Bar - Upgrade More Info | Check car compatibility | |
Upgrade parts for use with NEXT Miracle Cross Bar. |
NEXT Miracle Cross Bar Full Kit | Check car compatibility | |
  |
NEXT Option Part Set | Check car compatibility | |
  |
NEXT Paralell Bar | Check car compatibility | |
  |
NISMO Body Brace Set | Check car compatibility | |
This three piece Body Brace Set will allow you to get the highest level of racing performance possible out of a car equipped with a high performance suspension and high grip tires. It effectively controls car body flex to improve maneuverability when attacking sharp corners and ameliorates response when taking on s-curves at top speed. |
NISMO Power Brace System 2 | Check car compatibility | |
The left and right brackets have been molded with the bar to create a box reinforcement. This structure provides greater chassis and steering rigidity, which improves steering response and makes driving more stable. It also prevents the changes in alignment that can come from lack of rigidity in high-load situations such as circuit racing. The tension rod brackets which form the base of the structure have the same shape as the standard parts, so the installation points are still the same. It can be used with NISMO tension rods or pillow-type tension rods from other manufacturers (for maximum effectiveness, use together with the NISMO suspension link set series). |
NISMO Under-Floor Reinforcing Bar | Check car compatibility | |
These parts help reinforce the vehicle's rigidity against twisting and bending. Installation will provide a more linear sense of stability. Properly installed, these bars do not infringe on minimum ground height clearance. |
OKUYAMA CARBING Floor Sub Frame | Check car compatibility | |
  |
OKUYAMA CARBING Frame Brace | Check car compatibility | |
  |
OKUYAMA CARBING Lower Arm Bar | Check car compatibility | |
  |
OKUYAMA CARBING Lower Arm Support Brace | Check car compatibility | |
  |
OKUYAMA CARBING Member Brace | Check car compatibility | |
  |
OKUYAMA CARBING Performance Rod | Check car compatibility | |
Connect member and transmission. By stabilizing the the transmission, drivetrain loss is minimized and shift feeling is improved. |
OKUYAMA CARBING Trunk Brace Bar | Check car compatibility | |
  |
PROVA Motion Control Beam | Check car compatibility | |
Motion control beam (MCB) controls roll-moment and stress of chassis in front and rear ends enhancing tyre grip under cornering and achieving stable motion of the vehicle. Use these combination of friction guide and disc spring has achieved a simple, durable, highly strong casing and shaft, and exclusivly heavy duty mount brackets, which adopts a friction damper structure strong enough to act as a reinforcing part, while damping the stress from road surfaces. Produced in cooperation with AISIN Seiki. |
Ralliart Fender Inner Brace | Check car compatibility | |
  |
Ralliart Front Floor Brace | Check car compatibility | |
  |
SARD SARD Damper | Check car compatibility | |
SARD x AISIN collaboration item. Improved line tracing performance. Reduced body roll during cornering. Improved pitch convergence after passing uneven road surfaces. The SARD Damper is installed in the front and rear parts of the cabin where the body twists greatly, suppressing unpleasant vibrations and roll overshoots. Read more...It achieves both improved steering response and high-quality ride comfort. A damper with a damping mechanism is incorporated in the component parts to improve steering operability and suppress minute vibrations that can be felt by humans. AISIN's unique mechanical structure, a friction damper that combines disc springs and friction plates, is effective even at low telescopic stroke speeds. |
SPOON SPORTS Honda Brace Bar | Check car compatibility | |
  |
SPOON SPORTS Center Brace Bar | Check car compatibility | |
  |
SPOON SPORTS Cross Beam Bar | Check car compatibility | |
  |
SPOON SPORTS Front Stiff Plate Kit | Check car compatibility | |
  |
SPOON SPORTS Gusset Plates | Check car compatibility | |
  |
SPOON SPORTS Lower Arm Bar | Check car compatibility | |
  |
SPOON SPORTS Motion Control Beam | Check car compatibility | |
Improves the comfort and quality of street use, as well as turning performance during cornering, by controlling the rigidity of the front and rear ends of the body, where the torsion occurs most during driving, with a specially constructed damper. Motion control beam is fastened with a damper equipped with a special friction mechanism at the forefront of the front reinforcement and the rear end of the rear end panel. Read more...By installing a friction damper against the twist on the body side diagonal due to load movement, torsion of the body is significantly reduced, ensuring a certain level of rigidity. Although the normal reinforcement brace alone can secure rigidity, the fine vibration will increase. By installing this friction damper, the fine vibration is absorbed and a high-quality ride with no noise is realized. Large inputs work against the torsion of the body that occurs during cornering, and the high repulsion spring suppresses the torsion in the same way as a solid brace. Alternatively, a small input suppresses twisting finely by the elastic force of the friction plate. By controlling this non-constant torsional input separately, it is possible to perform a wide range of suppression. |
SPOON SPORTS Rear Stiff Plate Kit | Check car compatibility | |
  |
SPOON SPORTS Side Gusset Plates | Check car compatibility | |
  |
SPOON SPORTS Steering Stiff Plate Kit | Check car compatibility | |
  |
SPOON SPORTS Stiff Plate | Check car compatibility | |
  |
STi Flexible Draw Stiffener | Check car compatibility | |
By installing between the car body and the cross member, we can compensate for the bending of the chassis while driving and to combine agile initial steering and supple ride comfort. In addition, by improving the road contact of the four wheels, stability during cornering increases, realizing a quick and straightforward steering wheel steering feeling. |
STi Flexible Lower Arm Bar | Check car compatibility | |
This lower arm bar has link balls on both ends and is to be installed between both ends of the under floor cross member. Similar to the Flexible Tower Bar, this design controls the input of unnecessary forces. |
STi Flexible Support Kit | Check car compatibility | |
A pillow ball bush mounted to the central part of the support plate which connects the sub-frame and body ensures that the necessary amount of power is transmitted to the rear wheels without delay, and at the same time blocks any unnecessary force input. This design improves the responsiveness and grip of the rear wheels, and increases roll rigidity, resulting in a more stable control and comfortable ride. |
STi Guard Bar (For Flexible Draw Stiffener - Rear) | Check car compatibility | |
Optional part that protects STi Flexible Draw Stiffner from deformation or damage due to contact from baggage when loading into the trunk or in the case of hard braking while driving. |
STi Lower Arm Bar | Check car compatibility | |
  |
STi Performance Damper | Check car compatibility | |
  |
STi Support Front Kit | Check car compatibility | |
Improves stability when cornering, and provides fast, responsive steering performance while still allowing for a comfortable ride. |
STi Support Kit | Check car compatibility | |
Improves stability when cornering, and provides fast, responsive steering performance while still allowing for a comfortable ride. |
Sunline Racing SLR Inner Brace Kit | Check car compatibility | |
Improves stability at high speeds and cornering. |
Suzuki Sport Performance Member | Check car compatibility | |
  |
SYMS COX Body Damper | Check car compatibility | |
Setting by SYMS. |
SYMS COX Body Damper Option Bracket | Check car compatibility | |
  |
TANABE REALSPORTS x TANABE Floor Brace | Check car compatibility | |
  |
TANABE SUSTEC Under Brace | Check car compatibility | |
  |
TANABE SUSTEC Under Brace | Check car compatibility | |
  |
TOM's Brace Set | Check car compatibility | |
  |
TOM's Lower Performance Rod | Check car compatibility | |
  |
TOMEI Floor Support Bar | Check car compatibility | |
  |
TRD Flexible Draw Stiffener | Check car compatibility | |
By installing between the car body and the cross member, we can compensate for the bending of the chassis while driving and to combine agile initial steering and supple ride comfort. In addition, by improving the road contact of the four wheels, stability during cornering increases, realizing a quick and straightforward steering wheel steering feeling. |
TRD Member Brace Set | Check car compatibility | |
  |
TRD GR Member Brace Set | Check car compatibility | |
  |
TRD GR Performance Damper | Check car compatibility | |
  |
TRD GR Performance Damper and Brace Set | Check car compatibility | |
  |
TRD GR Rear V Brace | Check car compatibility | |
  |
Tryforce Front Tension Bar | Check car compatibility | |
  |
Tryforce Front Upper Support Member | Check car compatibility | |
  |
Tryforce Low Height Floor Member Stay | Check car compatibility | |
Brackets (Stays) only. |
Tryforce Low Height Floor Reinforcement Kit | Check car compatibility | |
  |
Tryforce Rear Brace | Check car compatibility | |
  |
URAS Nomu No Hokubune | Check car compatibility | |
  |
URAS Tokujaws (Rear Cross Bar) | Check car compatibility | |
  |